|
Parvosol II RTU - Gallon
Disinfectant
Active Ingredient(s):
n-Alkyl (60% C14, 30% C16, 5% C12, 5% C18) dimethyl benzyl ammonium
chlorides 0.105%
n-Alkyl (68% C12, 32% C14) dimethyl ethylbenzyl ammonium chlorides
0.105%
Inert Ingredients 99.790%
Total 100.000%
Indications: A cleaner and disinfectant for use in home and hospitals.
This product exhibits virucidal activity against canine parvovirus.
Directions for Use: It is a violation of Federal law to use this product
in a manner inconsistent with its labeling. PARVOSOL����Śreg; II RTU is
designed specifically as a general non-acid cleaner and disinfectant for
use in homes and hospitals: authorized by USDA for use in federally
inspected meat and poultry processing plants. It is formulated to
disinfect hard, non-porous, inanimate environmental surfaces such as
floors, walls, metal surfaces, stainless steel surfaces, porcelain,
glazed ceramic tile, plastic surfaces, and cabinets. A rinse with
potable water is required for surfaces in direct contact with food. In
addition, this product deodorizes those areas which generally are hard
to keep fresh smelling, such as garbage storage areas, empty garbage
bins and cans, basements, and other areas which are prone to odors
caused by microorganisms.
Disinfection, Deodorizing and Cleaning - Remove gross filth or heavy
soil prior to application of the product. Hold container six to eight
inches from surface to be treated. Spray area until it is covered with
the solution. Allow product to penetrate and remain wet for 10 minutes.
No scrubbing is necessary. Wipe off with a clean cloth, mop or sponge.
The product will not leave grit or soap scum.
Virucidal Activity - This product, when used on environmental,
inanimate, non-porous surfaces, exhibits effective virucidal activity
against Canine Parvovirus.
Tuberculocidal Activity - This product exhibits disinfectant efficacy
against Mycobacterium tuberculosis (BCG) in 10 minutes at 20 degrees
Centigrade when used as directed on previously cleaned hard non-porous
inanimate surfaces.
Bactericidal Activity - When used as directed, this product exhibits
effective disinfectant activity against the organisms: Staphylococcus
aureus, Salmonella choleraesuis, Pseudomonas aeruginosa, Escherichia
coli 0157:H7, and meets the requirements for hospital use.
Contact Time: Allow surface to remain wet for 10 minutes.
Mildewstat - To control mold and mildew on pre-cleaned, hard, non-porous
surfaces, spray surface to be treated making sure to wet completely. Let
air dry. Repeat application at weekly intervals or when mildew growth
appears.
Fungicidal Activity - This product is fungicidal against the pathogenic
fungi, Trichophyton mentagrophytes (Athlete's Foot Fungus) when used as
directed on clean, non-porous, hard surfaces commonly contacted by bare
feet.
Efficacy tests have demonstrated that this product is an effective
bactericide, fungicide, and virucide in the presence of organic soil (5%
blood serum).
Presentation: 1 gallon. |
